Ключевые слова: power equipment, power distribution system, dc performance, cables, MgB2, design, status
Ключевые слова: HTS, YBCO, coated conductors, measurement technique, quench propagation, normal zone propagation, modeling, experimental results
Ключевые слова: accelerator magnets, measurement setup, cryogenic systems, magnets quadrupole, facility
Ключевые слова: HTS, current leads, design, design parameters, numerical analysis, GdBCO, coated conductors, heat exchanger, facility
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Bellomo G., Sorbi M., Alessandria F., Quadrio M., Manfreda G.
Ключевые слова: magnets dipole, synchrotron, ac losses, experimental results
Sorbi M., Alessandria F., Baldessari G., Bellomo G., Fabbricatore P*3., Farinon S., Gambardella U., Leone A., Musenich R., Paccalini A., Pedrini D., Quadrio M., Todero M., Volpini G.
Ключевые слова: accelerator magnets, magnets dipole, prototype, test results, design parameters, quench properties, high field magnets
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Karlemo B., Bellomo G., Sorbi M., Saggese A., Mueller H., Holm M., Alessandria F., Pedrini D., Iannone G.
Ключевые слова: magnetization, bulk, numerical analysis, modeling, disks, spheres, critical state model, ac losses, critical caracteristics
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Marabotto R., Bellomo G., Sorbi M., Alessandria F., Leone A., Paccalini A., Pedrini D., Quadrio M., Todero M.
Ключевые слова: magnets dipole, synchrotron, design, cryogenic systems, cryostat, pulsed operation, training effect, test results
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Marabotto R., Bellomo G., Sorbi M., Muller H., Alessandria F.
Ключевые слова: synchrotron, magnets dipole, design, design parameters, LTS, NbTi, Rutherford cables, cryogenic systems, model small-scale
Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G., Fabbri F., Rizzo F., Augieri A., Saggese A., Messina G., Armenio A.A., Sabatino P., Iannone G.
Malagoli A., Ferdeghini C., Gambardella U., Breschi M., Fabbri M., Ribani P.L., Pace S., Vignolo M., Morandi A., Romano G., Saggese A., Casali M.
Ключевые слова: LTS, Nb3Sn, NbTi, wires multifilamentary, resistivity, measurement technique, susceptibility, comparison, current-voltage characteristics
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Karlemo B., Bellomo G., Sorbi M., Holm M., Alessandria F.
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Marabotto R., Bellomo G., Sorbi M., Alessandria F.
Ключевые слова: accelerator magnets, magnets dipole, design, mechanical properties, pulsed operation, numerical analysis, high field magnets
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Bellomo G., Sorbi M., Alessandria F.
Volpini G., Fabbricatore P., Musenich R., Gambardella U., Farinon S., Marabotto R., Bellomo G., Sorbi M., Alessandria F.
Ключевые слова: accelerator magnets, synchrotron, magnets dipole, design, coils model, design parameters, high field magnets
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G., Augieri A., Longo G., Cricenti A.
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, PLD process, RABITS process, texture, coatings, buffer layers, electron beam evaporation, microstructure, fabrication, substrate Ni-W
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G., Augieri A., Angrisani A., Colantoni I., Thalmaier G.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-Cu, texture, fabrication, mechanical properties
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G., Fabbri F., Augieri A., Padeletti G., Cusma A.
Petrisor T., Gambardella U., Celentano G., Augieri A.(augieri@frascati.enea.it), Halbritter J.
Ferdeghini C., Fabbricatore P., Gambardella U., Celentano G., Greco M., Bernini C., Devred A.(arnaud.devred@cea.fr)
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, flux-jump stability, composition, PIT process, fabrication
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Vannozzi A., Celentano G., Fabbri F., Augieri A.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-W, texture, grain size, mechanical treatment, strain effects, fabrication, RABITS process
Gambardella U., Matrone A., Ginocchio S., Pace S., Giunchi G., Perini E., Cavallin T., Quarantiello R., Cavaliere V.
Gambardella U., Masullo G., Matrone A., Pace S., Quarantiello R., Saggese A., Sessa P., Guarino A., Petrillo E.
Ключевые слова: MgB2, tapes, stability, measurement technique, normal zone propagation, numerical analysis, experimental results
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G., Fabbri F., Augieri A., Pompeo N., Silva E.
Ключевые слова: HTS, YBCO, films, doping effect, substrate SrTiO3, pinning centers artificial, PLD process, Jc/B curves, angular dependence, critical caracteristics, fabrication
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Rufoloni A., Vannozzi A., Celentano G., Augieri A., Halbritter J.
Ferdeghini C., Gambardella U., Braccini V., Tarantini C., Putti M., Manfrinetti P., Palenzona A., Pallecchi I., Aebersold H.U., Lehmann E., Vignolo M., Bernini C.
Celentano G.(celentano@frascati.enea.it), Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Augieri A.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-W, buffer layers, texture, fabrication, microstructure
Petrisor T., Boffa V., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Vannozzi A., Celentano G., Augieri A., Rufoloni A.(rufoloni@frascati.enea.it)
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Celentano G., Fabbri F., Augieri A., Vannozzi A.(vannozzi@frascati.enea.it)
Ключевые слова: HTS, YBCO, coated conductors, RABITS process, substrate Ni-W, heat treatment, microstructure, fabrication
Petrisor T., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Tuissi A., Villa E., Celentano G., Augieri A.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-Cr-W, RABITS process, seed layers, PLD process, microstructure, fabrication
Varesi E., Celentano G.(celentano@frascati.enea.it), Petrisor T., Boffa V., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A.
Varesi E., Petrisor T., Galluzzi V., Rufoloni A., Vannozzi A., Mancini A.(mancini@frascati.enea.it), Celentano G., Fabbri F., Rogai R., Boffa V.(vincenzo.boffa@pirelli.com), Gambardella U.(gamba@sa.infn.it)
Ключевые слова: HTS, YBCO, coated conductors, substrate Hastelloy, ISD process, buffer layers, microstructure, experimental results, fabrication, magnetic properties
Varesi E., Petrisor T., Boffa V., Ciontea L., Galluzzi V., Gambardella U., Mancini A., Rufoloni A., Vannozzi A., Celentano G.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.